陇南驾校考试 英文

1. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer: C

2. What is this instrument?

A. pressure meter

B. ammeter

C. water temperature meter

D. fuel meter

Answer: D

3. When a vehicle overtakes the bike riders going in the same direction, the rational way to deal with is to ________.

A. Continuously honk to remind them to yield

B. Continuously honk and speed up to overtake

C. Yield to the bike riders

D. Observe them, reduce speed and go slowly, while keeping a sufficient safe distance.

Answer: D

4. What marking is the triagle filled area in the circle?

A. stop line

B. deceleration line

C. guide line

D. cross-hatched marking

Answer: C

5. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer: A

6. It lights to indicate that ______

A. charge current is too large

B. damaged battery

C. ammeter malfunction

D. charging circuit malfunction

Answer: D

7. When reserving on an ordinary road and discovering some vehicles are passing, the driver should _________.

A. Honk to indicate the intention

B. Voluntarily stop and yield

C. Speed up and reverse

D. Continue to reverse

Answer: B

8. Whats the meaning of this sign?

A. watch for danger

B. bypass from right side

C. bypass from left side

D. one-way pass

Answer: C

9. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer: B

10. Whats the meaning of this sign?

A. watch for pedestrians

B. watch for children

C. school area

D. crosswalk

Answer: A

11. This sign warns the driver there is a crosswalk ahead.

A. Right

B. Wrong

Answer: B

12. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. turn right

B. change lane

C. reduce speed and pass slowly

D. pull over

Answer: C

13. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

14. When driving in icy and snowy weather, light reflection from the accumulated snow can easily make a driver feel dizzy and have an illusion.

A. Right

B. Wrong

Answer: A

15. Whats the meaning of the yellow marking on the road?

A. gradual road width

B. more carriageways

C. closing to obstacle

D. construction section indication

Answer: A

16. Pass the crossing as fast as possible if there is a red light at the intersection of a road or a level crossing.

A. Right

B. Wrong

Answer: B

17. Driving a motorized vehicle on the road in violation of road traffic regulations shall be subject to relevant punishment.

A. Right

B. Wrong

Answer: A

18. This sign indicates landslide section ahead and bypassing.

A. Right

B. Wrong

Answer: B

19. It lights to indicate that ______

A. the hazard lights flash

B. right-turn signal flashes

C. left-turn signal flashes

D. front and rear width lights flash

Answer: A

20. How to do in this situation?

A. stop and yield to the pedestrians

B. bypass from the front of the pedestrians

C. honk to remind the pedestrians

D. bypass from the rear of the pedestrians

Answer: A

21. What is this instrument?

A. water temperature meter

B. fuel meter

C. ammeter

D. pressure meter

Answer: A

22. Which kind of vehicle can be driven if the authorized vehicle applied for is small motor vehicle with automatic transmission?

A. low-speed truck

B. small motor vehicle

C. motorcycle

D. light truck with automatic transmission

Answer: D

23. A motorized vehicle driver is not allowed during the period of probation to pull a trailer.

A. Right

B. Wrong

Answer: A

24. What is the max speed when in or out of the lane for non-motorized vehicles?

A. 40km/hr

B. 50km/hr

C. 60km/hr

D. 30km/hr

Answer: D

25. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer: A