海北英文驾考科目一资料

1. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

2. Does not affect normal driving when it lights

A. Right

B. Wrong

Answer: B

3. How long is the period of probation after a motorized vehicle driver obtains his driving license for the first time or the permission to drive higher level vehicles.

A. 6 months

B. 12 months

C. 2 years

D. 3 months

Answer: B

4. Whats the meaning of this sign?

A. special lane for large buses

B. special lane for multi-passenger vehicles

C. special lane for public buses

D. special lane for BRT vehicles

Answer: D

5. How to use lights when entering the speed-reducing lane?

A. turn on the hazard lights

B. turn on the head light

C. turn on the left-turn signal

D. turn on the right-turn signal

Answer: D

6. What is this manipulation device?

A. air conditioner switch

B. ignition switch

C. wiper switch

D. light switch

Answer: B

7. When a motorized vehicle driving license is lost or destroyed to be unrecognizable, the driver should apply to the issuing vehicle management station for a reissue.

A. Right

B. Wrong

Answer: A

8. What is this instrument?

A. pressure meter

B. ammeter

C. water temperature meter

D. fuel meter

Answer: D

9. Use the high and low beam lights alternately when passing the crosswalk at night.

A. Right

B. Wrong

Answer: A

10. Which is correct if a vehicle breaks down and is difficult to move?

A. turn on the hazard lights

B. turn on all the lights of the vehicle

C. forbid the passengers to get off

D. place a warning sign in front of the vehicle

Answer: A

11. The driving license of 10-year validity will be issued if the penalty points never reached 12 points in every scoring cycle during the 6-year validity of the license.

A. Right

B. Wrong

Answer: A

12. Driving a motorized vehicle in the city road which has no central line, the maximum speed can not exceed 50 kilometers per hour.

A. Right

B. Wrong

Answer: B

13. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C

14. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer: B

15. A motorized vehicle can make a U turn on this road as long as it does not interfere other vehicles.

A. Right

B. Wrong

Answer: A

16. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: B

17. Driving license will be detained if you allow to drive your car.

A. driver during the period of probation

B. driver who has obtained a driving license

C. one whose driving license been revoked

D. one whose penalty points reach 6 points

Answer: C

18. When a vehicle is being overtaken by another vehicle, and there is a vehicle following behind, the driver should _____.

A. continue to speed up and run

B. turn slightly to the right side, keep a safe horizontal distance

C. run by road center

D. speed up to the right side to yield

Answer: B

19. When the motor vehicle installed ABS system brakes, the braking distance will be greatly shortened, so you do not have to keep a safe distance between vehicles.

A. Right

B. Wrong

Answer: B

20. The vehicles should run by the right shoulder of an expressway.

A. Right

B. Wrong

Answer: B

21. Whats the meaning of this sign?

A. road narrows on the left side

B. narrow bridge

C. narrow road

D. road narrows on the right side

Answer: B

22. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

23. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer: A

24. When the tire pressure is too low, the fast-running tire can change its shape like waves and increase its temperature, which in turn can cause ________.

A. Even lower tire pressure

B. Increases resistance to the vehicle

C. Tire blowout

D. Unstable tire pressure

Answer: C

25. When a vehicle reaches a muddy or burst-and-muddy section, the driver should stop,observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A