陇南科目一考试英语

1. It lights when turning on the right-turn signal.

A. Right

B. Wrong

Answer: B

2. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

3. As thick fog reduces visibility, turning on the high beam light can increase the visibility.

A. Right

B. Wrong

Answer: B

4. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer: A

5. The vehicle is allowed to _______ at this intersection.

A. go straight

B. turn right

C. turn left

D. go straight or turn left

Answer: B

6. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

7. A driver should stop on the expressway at once to have a rest when he feel tired.

A. Right

B. Wrong

Answer: B

8. When a vehicle passes a curve on a mountain road, the driver should reduce speed, honk and stick to the right.

A. Right

B. Wrong

Answer: A

9. When running on an expressway, the driver should ____ if he has missed the exit.

A. Reverse to the original place

B. Continue to go ahead and find the next exit

C. Immediately stop

D. Make a U turn from where he is

Answer: B

10. Whats the meaning of this sign?

A. stop by the left side of the road

B. downhill section left

C. left turn only

D. run by the left side of the road

Answer: D

11. Whats the meaning of this sign?

A. yield if going to turn left

B. straight one-way road

C. right one-way road

D. left one-way road

Answer: D

12. What kind of violation does the vehicle have while temporarily stopping by the roadside?

A. stop in the crosswalk

B. stop more than 30cm from the roadside

C. stop in the section with no stopping marking

D. stop occupying the lane for non-motorized vehicles

Answer: A

13. You can overtake from both sides in this case.

A. Right

B. Wrong

Answer: B

14. How far away should the warning sign be placed in the coming direction when this vehicle breaks down and stops temporarily on the expressway?

A. beyond 150m

B. 50~150m

C. within 50m

D. 50~100m

Answer: A

15. A motorized vehicle driver is not allowed during the period of probation to pull a trailer.

A. Right

B. Wrong

Answer: A

16. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer: B

17. What does this sign mean?

A. Reminding continuous two or more up slopes ahead

B. Reminding the steep uphill road ahead

C. Reminding the steep downhill road ahead

D. Reminding continuous two or more down slopes ahead

Answer: D

18. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

19. The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer: B

20. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer: B

21. This sign warns a sharp left curve ahead.

A. Right

B. Wrong

Answer: A

22. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer: A

23. The driving license of a motorized vehicle driver will be detained after his penalty scores reach 12 points in a scoring circle.

A. Right

B. Wrong

Answer: A

24. What is the max speed on this highway?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer: D

25. When a vehicle approaches a crosswalk, the driver should ________.

A. Speed up and pass

B. Stop immediately

C. Honk to indicate the pedestrians to yield

D. Observe the movement of pedestrians and non-motorized vehicles, make sure it is safe before passing

Answer: D