盘锦2026考驾驶证英语试题

1. When the driver senses a tire blowout on the road, he should control the direction of the vehicle and use emergency braking to bring the vehicle swiftly to a stop.

A. Right

B. Wrong

Answer: B

2. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

3. The safety pillow is used to protect the driver‘s head when there is a rear-end collision.

A. Right

B. Wrong

Answer: B

4. Speed up and pass when encountering this traffic light at the intersection

A. Right

B. Wrong

Answer: B

5. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer: C

6. When the light switch is rotated to the position, the whole car lights turn on.

A. Right

B. Wrong

Answer: B

7. A small bus driver should reduce speed rapidly when he suddenly feel bumpy on a flat expressway, to prevent tire blowout.

A. Right

B. Wrong

Answer: A

8. The behavior of a motorized vehicle driver who has violated the law and regulations on road traffic safety is _______ .

A. faulty act

B. violation of regulations

C. rule-breaking act

D. violation of law

Answer: D

9. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

10. When the fire engine, ambulance and wrecker are executing an emergency task, other vehicles should yield.

A. Right

B. Wrong

Answer: A

11. The child in the motorized vehicle does not need to buckle up when the vehicle runs.

A. Right

B. Wrong

Answer: B

12. A qualified driver should not only be technically adept, but more importantly have good driving habits and ethical attainments.

A. Right

B. Wrong

Answer: A

13. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C

14. Whats the meaning of this mark on the road?

A. the lane for non-motorized vehicles

B. the special lane for motorcycles

C. the special lane for battery bicycles

D. the special lane for bicycles

Answer: A

15. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. tunnel entry

B. observatory

C. mind side wind

D. wind vane

Answer: C

17. Whats the meaning of this sign?

A. special lane for large buses

B. special lane for multi-passenger vehicles

C. special lane for public buses

D. special lane for BRT vehicles

Answer: D

18. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

19. What is the max speed when passing this curve?

A. 40km/hr

B. 30km/hr

C. 50km/hr

D. 70km/hr

Answer: B

20. What is the max speed on muddy road?

A. 15km/hr

B. 20km/hr

C. 40km/hr

D. 30km/hr

Answer: D

21. Whats the meaning of this sign?

A. danger-avoiding lane

B. emergency lane

C. road shoulder

D. sharp curve

Answer: A

22. When a following vehicle gives the overtaking signal, the driver should ________ if conditions permit.

A. Move to the right side and speed up

B. Voluntarily reduce speed and drive along the right side

C. Yield a proper space and speed up

D. Reduce speed rapidly or apply an emergency braking

Answer: B

23. When a vehicle approaches a crosswalk, the driver should ________.

A. Speed up and pass

B. Stop immediately

C. Honk to indicate the pedestrians to yield

D. Observe the movement of pedestrians and non-motorized vehicles, make sure it is safe before passing

Answer: D

24. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer: A

25. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer: C