河源驾照考试英文

1. It displays the current engine speed is 6000 rev / min.

A. Right

B. Wrong

Answer: B

2. You may speed up to go through the intersection in this case.Answer：

A. Right

B. Wrong

Answer: B

3. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer: B

4. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer: B

5. Traffic lights are divided into red, green and yellow light.

A. Right

B. Wrong

Answer: A

6. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

7. When encountering non-motorized vehicles cutting in on the road, the driver should ___.

A. Honk to warn

B. Speed up and pass

C. Reduce speed and yield

D. Suddenly speed up when approaching

Answer: C

8. Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer: A

9. Traffic Police can detain the vehicle which is suspected of using the falsified or altered license plate and vehicle license.

A. Right

B. Wrong

Answer: A

10. How to run on this road?

A. run in the middle of the road

B. run on both side of the road

C. run according to lanes

D. go forward at will

Answer: A

11. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

12. It lights to indicate that ______

A. windscreen wash lacks

B. braking oil lacks

C. cooling system malfunction

D. coolant lacks

Answer: D

13. The oil pressure of engine may be too high if it lights.

A. Right

B. Wrong

Answer: B

14. When driving at night on a road that has good lighting, the driver should use _______.

A. The fog light

B. The low beam light

C. The high beam light

D. The hazard lights

Answer: B

15. A motorized vehicle is not allowed to stop in the section within

A. 5m

B. 10m

C. 50m

D. 30m

Answer: C

16. If a motorized vehicle causes a traffic accident on the road, the driver should immediately move the vehicle to the roadside.

A. Right

B. Wrong

Answer: B

17. How to use lights in this weather condition?

A. use high beam lights

B. use fog lights

C. not use any light

D. turn on the right-turn signal

Answer: B

18. Whats the meaning of this sign?

A. an unmanned level crossing 100m ahead

B. a manned level crossing 100m ahead

C. an unmanned level crossing 50m ahead

D. a manned level crossing 50m ahead

Answer: C

19. When reaching a sharp curve, the driver should reduce speed and drive on the right side so as to avoid colliding with the vehicle crossing the central line of the curve in the opposite direction.

A. Right

B. Wrong

Answer: A

20. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer: D

21. Whats the meaning of this sign?

A. landslide section

B. construction section

C. factory ahead

D. jammed road

Answer: B

22. What is this manipulation device?

A. air conditioner switch

B. ignition switch

C. wiper switch

D. light switch

Answer: B

23. Whats the meaning of this sign?

A. stop to yield

B. one-way road

C. going first when crossing each other

D. the opposite vehicle goes first when crossing each other

Answer: C

24. Whats the meaning of the yellow mark on the road?

A. no going straight

B. allowed to make a U turn

C. no U turn

D. no making a turn

Answer: C

25. Whats the meaning of the yellow marking on the road?

A. gradual road width

B. more carriageways

C. closing to obstacle

D. construction section indication

Answer: A