银川英文驾照科目一考试

1. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

2. What device does the switch of this symbol control?

A. child safety lock

B. window glasses of both sides

C. electric door

D. door unlock

Answer: A

3. Whats the meaning of this sign?

A. muddy road

B. low-lying road

C. overflowing road

D. ferry

Answer: C

4. Whats the meaning of this sign?

A. streets on both sides

B. main road go first

C. stop to yield

D. one-way road

Answer: B

5. When a driver drives a motorized vehicle during the period of probation, the driver should paste or hang a uniform probation mark on the rear part of the vehicle.

A. Right

B. Wrong

Answer: A

6. What is this traffic sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer: D

7. It displays that oil in tank has less than the warning line

A. Right

B. Wrong

Answer: A

8. The front safety bags play a fully protective role when used in conjunction with ______

A. ABS system

B. seat belt

C. safety pillow of the chair

D. safety glasses

Answer: B

9. It lights to indicate that the handbrake may not loose in the end.

A. Right

B. Wrong

Answer: B

10. This sign warns the driver there have traffic lights ahead.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this figure mark on the road?

A. a mark of keeping distance

B. a mark of minimum distance

C. a mark of speed limit

D. a mark of road number

Answer: C

12. It lights to indicate that ______

A. the head fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the tail fog light is turned on

Answer: C

13. Which is correct in this kind of intersection?

A. make a U turn along the left lane

B. cannot make a U turn

C. make a U turn through the middle lane

D. make a U turn inside the intersection

Answer: B

14. It lights to indicate that ______

A. left-turn signal flashes

B. front and rear width lights light on

C. front and rear width lights light on

D. right-turn signal flashes

Answer: A

15. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

16. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

17. You may not use the turn signal when you change to the right lane.

A. Right

B. Wrong

Answer: B

18. When a vehicle approaches a bus stopping at a bus stop, the driver should ______ in case the bus starts up suddenly or pedestrians cross in front of the bus.

A. Reduce speed, keep a sufficient distance and be ready to stop anytime

B. Maintain the normal speed

C. Honk to remind, speed up and pass

D. Be ready to apply emergency braking

Answer: A

19. A driver may drive on the road a motorized vehicle overhauled which has reached the scraped standard.

A. Right

B. Wrong

Answer: B

20. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

21. It lights to indicate that luggage compartment is open.

A. Right

B. Wrong

Answer: B

22. Driving a motorized vehicle on the highway which has no central line, the maximum speed can not exceed 70 kilometers per hour.

A. Right

B. Wrong

Answer: B

23. Whats the meaning of this sign?

A. T-shaped intersection ahead

B. road branching point ahead

C. Y-shaped intersection ahead

D. intersection ahead

Answer: A

24. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

25. When following a vehicle, the following vehicle may use the high beam light.

A. Right

B. Wrong

Answer: B