三明Chinese Driving License Test

1. When the green light at a congested intersection is on, the vehicles _______.

A. May directly enter the intersection

B. Cannot enter the intersection

C. May pass the intersection by borrowing the opposite lane

D. Enter the intersection if it is safe to do so

Answer: B

2. May turn right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: A

3. What kind of sign is it?

A. directional sign

B. indicative sign

C. prohibitive sign

D. warning sign

Answer: A

4. The yellow lane-dividing line on the road is used to _____

A. allow to drive in left lane

B. separate the traffic flow in opposite directions

C. separate the traffic flow in the same direction

D. prohibit to cross the opposite lane

Answer: B

5. When a vehicle goes downhill, it may fully use the neutral gear and slide.

A. Right

B. Wrong

Answer: B

6. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

7. In which section cannot overtake?

A. main streets

B. elevated road

C. crosswalk

D. ring express

Answer: C

8. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer: B

9. When a vehicle reaches a muddy or burst-and-muddy section, the driver should stop,observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A

10. Which of the following vehicle in front in the same lane is not allowed to be overtaken?

A. large bus or large truck

B. fire engine on duty

C. public bus

D. taxis

Answer: B

11. Move the switch up and down, the windscreen wipers start working.

A. Right

B. Wrong

Answer: A

12. This sign indicates one-way section ahead.

A. Right

B. Wrong

Answer: B

13. How to run in this situation?

A. stop and yield to the opposite car

B. turn on the left-turn signal and run on the left side

C. turn on the head lights to let the other side yield

D. speed up to bypass the obstacle and then cross the other vehicle

Answer: A

14. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

15. It displays that oil in tank has less than the warning line

A. Right

B. Wrong

Answer: A

16. When the tire pressure is too low, the fast-running tire can change its shape like waves and increase its temperature, which in turn can cause ________.

A. Even lower tire pressure

B. Increases resistance to the vehicle

C. Tire blowout

D. Unstable tire pressure

Answer: C

17. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

A. Right

B. Wrong

Answer: A

18. The subject 3 test is divided into two parts including Driving Skills, Common Knowledge on Safe and Courteous Driving.

A. Right

B. Wrong

Answer: A

19. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer: D

20. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer: C

21. Whats the meaning of this sign?

A. T-shaped intersection

B. branching intersection

C. reduce speed to pass

D. dead-end road

Answer: D

22. A motorized vehicle driver is not allowed during the period of probation to pull a trailer.

A. Right

B. Wrong

Answer: A

23. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

24. When the light switch is rotated to the position, the whole car lights turn on.

A. Right

B. Wrong

Answer: B

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C