广安驾照考试英语

1. When bicycles ahead obstruct the traffic flow, the driver may honk to remind them,speed up and bypass.

A. Right

B. Wrong

Answer: B

2. How to do when encountering slow-moving vehicles in front?

A. follow the vehicles in front

B. occupy the opposite lane to overtake

C. borrow the lane from right side to overtake

D. overtake from both sides as will

Answer: A

3. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer: B

4. This sign reminds dangerous hillside road ahead.

A. Right

B. Wrong

Answer: B

5. Whats the meaning of this sign?

A. accident-prone section

B. construction section

C. reducing speed and going slowly section

D. jammed section

Answer: A

6. This sign reminds the lane for non-motorized vehicles ahead.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of the diamond broken lines on the road?

A. road construction marking

B. vertical deceleration marking

C. horizontal deceleration marking

D. fewer lanes indication marking

Answer: B

8. When encountering school children crossing the road in a queue, the driver should ______.

A. Speed up in advance and pass forcefully

B. Stop to yield

C. Reduce speed and go slowly

D. Continuously honk to urge them

Answer: B

9. This sign reminds there is a ferry ahead for vehicles.

A. Right

B. Wrong

Answer: A

10. Whats the meaning of this sign?

A. more vehicles section

B. passing slowly

C. jammed section

D. construction section

Answer: B

11. The age should be 18 ~ 70 years old when applying for the driving license of small vehicle or three-wheeled automobile.

A. Right

B. Wrong

Answer: A

12. Whats the meaning of this sign?

A. a manned level crossing

B. an unmanned level crossing

C. multi-crossing of railway and road

D. yielding the train with care

Answer: C

13. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

14. The contents of subject 2 test for small motor vehicle include Reversing stall parking, stopping at the appointed position and setting off on a slope, pulling over, driving by S-shaped line, sharp turning.

A. Right

B. Wrong

Answer: A

15. A motorized vehicle driver who drives the vehicle which permission is different is subject to a ________.

A. 2-point penalty

B. 3-point penalty

C. 6-point penalty

D. 12-point penalty

Answer: D

16. You may speed up to go through the intersection in this case.Answer：

A. Right

B. Wrong

Answer: B

17. If a front tire blowout has caused a turn in direction, the driver should not avoid excess adjustment. Instead, he should control the direction of the vehicle, ____, and slowly reduce the speed of the vehicle.

A. Apply emergency braking

B. Use the handbrake

C. Gently depress the brake pedal

D. Swiftly depress the brake pedal

Answer: C

18. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer: C

19. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: B

20. Driving a motorized vehicle on the expressway is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

21. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

22. Whats the meaning of this sign?

A. national boundaries

B. border defense

C. boundaries

D. customs

Answer: D

23. The continuously flashing yellow light means that the vehicle may speed up and pass.

A. Right

B. Wrong

Answer: B

24. Whats the meaning of this sign?

A. turn right

B. one-way road

C. going straight only

D. straight-going lane

Answer: A

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C