龙岩英文驾考科目

1. It lights to indicate that ______

A. charge current is too large

B. damaged battery

C. ammeter malfunction

D. charging circuit malfunction

Answer: D

2. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

3. Whats the meaning of the double white broken lines in far front of the intersection?

A. waiting to run line

B. stopping and yield line

C. slowdown and yield line

D. left-turn waiting line

Answer: C

4. No running into the middle lane when encountering this situation.

A. Right

B. Wrong

Answer: A

5. A motorized vehicle driver who drives more than 50% faster than the prescribed speed limit is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

6. Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer: A

7. What marking is it?

A. A cross-hatched marking

B. prohibitive area

C. guide line

D. central circle

Answer: D

8. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer: D

9. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: A

10. What device does the switch of this symbol control?

A. child safety lock

B. window glasses of both sides

C. electric door

D. door unlock

Answer: A

11. How to do first when encountering such kind of bridge?

A. maintain the speed and pass

B. speed up and pass as soon as possible

C. stop and observe

D. pass slowly

Answer: C

12. When a vehicle passes a sharp curve, it may overtake if traffic is light.

A. Right

B. Wrong

Answer: B

13. What marking are the white broken lines in the circles?

A. small vehicles turning lines

B. lane connection lines

C. non-motorized vehicles guide lines

D. intersection guide line

Answer: D

14. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer: D

15. Whats the meaning of this sign?

A. sharp right curve

B. bypass from right side

C. continuous curves

D. sharp left curve

Answer: A

16. It lights to indicate that ______

A. left-turn signal flashes

B. front and rear width lights light on

C. front and rear width lights light on

D. right-turn signal flashes

Answer: A

17. When a vehicle passes a narrow road or bridge, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

18. This sign warns slippery road ahead and running slowly with care.

A. Right

B. Wrong

Answer: B

19. A motorized vehicle is not allowed to stop in the section within

A. 5m

B. 10m

C. 50m

D. 30m

Answer: C

20. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

21. Which is correct when changing lane?

A. turn on the directional signal and turn left quickly

B. reduce speed properly when entering the left lane

C. cannot interfere other vehicles

D. speed up to enter the left lane

Answer: C

22. When driving in icy and snowy weather, light reflection from the accumulated snow can easily make a driver feel dizzy and have an illusion.

A. Right

B. Wrong

Answer: A

23. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer: C

24. One shall not drive a motorized vehicle during the period of deferred license checking due to military service, abroad and other reasons.

A. Right

B. Wrong

Answer: A

25. When encountering a vehicle coming in the opposite direction on a mountain road, the driver should ______ when crossing each other.

A. Not reduce speed

B. Stick to the center of the road

C. Speed up

D. Reduce speed or stop to yield

Answer: D