孝感英文版科目一考试题库

1. It lights continuously to indicate that engine control system failed.

A. Right

B. Wrong

Answer: A

2. Driving a motorized vehicle on the road in this condition, the maximum speed can not exceed 50 kilometers per hour.

A. Right

B. Wrong

Answer: B

3. Whats the meaning of this sign?

A. no left turn

B. leftt and right turn

C. no leftt and right turn

D. no right turn

Answer: B

4. If the registration paper, license plate and vehicle license of a motorized vehicle are lost or destroyed, the vehicle owner should apply for reissuing or replacing them to the _______________.

A. traffic police detachment vehicle management station at the residential place

B. vehicle management station at the issuing place of the driving license

C. vehicle management station at the registration place

D. local police station

Answer: C

5. Whats the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer: C

6. ABS system can keep the steering capability of the front wheels while providing maximum braking force when the vehicle conduct an emergency braking.

A. Right

B. Wrong

Answer: A

7. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer: B

8. This sign warns a sharp left curve ahead.

A. Right

B. Wrong

Answer: A

9. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

10. If an improper place is chosen for crossing another vehicle, the driver should immediately _______.

A. Reduce speed and cross each other slowly, or stop to yield

B. Occupy the left lane to force the opposite party to reduce speed and yield

C. Turn the head light to indicate the opposite party to stop and yield

D. Speed up and select a better place

Answer: A

11. A motorized vehicle is not allowed to stop in the section 50 meters to the narrow road less than 4 meters width.

A. Right

B. Wrong

Answer: A

12. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

13. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

14. If a motorized vehicle runs 50% faster than the specified speed limit, the driver is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

15. Before a vehicle enters a curve of a mountain road, the driver ______ if there is no vehicle coming in the opposite direction.

A. Should reduce speed, honk and drive on the right side

B. Should drive along the outer side of the curve

C. May briefly borrow the opposite lane

D. May speed up and pass along the tangent line of the curve

Answer: A

16. What kind of violation does this stopping car have?

A. stop occupying the lane for non-motorized vehicles

B. stop in the section with no stopping marking

C. stop at bus station

D. stop occupying sidewalk

Answer: C

17. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer: B

18. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

19. The braking system may malfunction if it lights.

A. Right

B. Wrong

Answer: A

20. It lights when ABS is open.

A. Right

B. Wrong

Answer: B

21. This sign indicates jammed section ahead and passing slowly.

A. Right

B. Wrong

Answer: B

22. When a vehicle passes a level crossing, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

23. This sign warns the driver there is a crosswalk ahead.

A. Right

B. Wrong

Answer: B

24. Which kind of sign is it?

A. warning sign

B. prohibitive sign

C. indicative sign

D. directional sign

Answer: B

25. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C