珠海英文驾考

1. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

2. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

3. Whats the meaning of this sign?

A. indication of the place name of the expressway ending

B. indication of the driving route of the expressway

C. indication of the driving direction of the expressway

D. indication of the location and distance of the expressway

Answer: D

4. A motorized vehicle driver who reverses, drives in the opposite direction or make a U turn by crossing the central dividing strip on the expressway is subject to a 6-point penalty.

A. Right

B. Wrong

Answer: B

5. It lights when turning on the front low beam lights.

A. Right

B. Wrong

Answer: B

6. Whats the meaning of this sign?

A. ring intersection ahead

B. intersection ahead

C. Y-shaped intersection ahead

D. T-shaped intersection ahead

Answer: C

7. The rear windshield defroster starts to work after pressing this switch.

A. Right

B. Wrong

Answer: B

8. When a motorized vehicle makes a U turn, turns around or goes down a slope, the maximum speed should not exceed 40 kilometers per hour.

A. Right

B. Wrong

Answer: B

9. When a vehicle leaves an expressway, it should reduce speed in the deceleration lane before entering the ramp.

A. Right

B. Wrong

Answer: A

10. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: C

11. It lights when turning on the rear fog light.

A. Right

B. Wrong

Answer: B

12. Speed up and pass when encountering this traffic light at the intersection

A. Right

B. Wrong

Answer: B

13. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

14. Whats the meaning of this sign?

A. passing by the right side

B. passing by the left side

C. running to right side

D. running the roundabout

Answer: D

15. Whats the meaning of this sign?

A. no left turn

B. leftt and right turn

C. no leftt and right turn

D. no right turn

Answer: B

16. Whats the meaning of this sign?

A. lane direction indication

B. intersection ahead

C. lane information indication

D. road branching point ahead

Answer: B

17. It lights to indicate that ______

A. the front fan works

B. air external circulation

C. windscreen defroster

D. air internal circulation

Answer: D

18. You should speed up to change lane in front of the red car.

A. Right

B. Wrong

Answer: B

19. The vehicles are prohibited from passing when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

20. If a motorized vehicle causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by a rescue vehicle or a tow truck.

A. Right

B. Wrong

Answer: A

21. Whats the meaning of this sign?

A. police call number on expressway

B. public phone on expressway

C. emergency call number on expressway

D. rescue call number on expressway

Answer: D

22. Causing a traffic accident due to violating the law and regulations on road traffic safety is the rule-breaking act.

A. Right

B. Wrong

Answer: B

23. Whats the meaning of this mark on the road?

A. minimum speed limit is 80km/hr

B. average speed is 80km/hr

C. maximum speed limit is 80km/hr

D. 80km/hr speed limit ban is lifted

Answer: A

24. Whats the meaning of this sign?

A. change to right lane

B. branching point

C. road surface becomes wider

D. the number of lanes increases

Answer: D

25. Whats the meaning of the white solid line in the middle of the road?

A. unilateral same direction lanes dividing line that can be crossed

B. same direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can not be crossed

Answer: B