赤峰科目一英文考试

1. When encountering a traffic jam on the expressway, the driver should follow the front vehicle lining up, and immediately turn on the hazard light to prevent rear-end collision.

A. Right

B. Wrong

Answer: A

2. What is the max speed on this expressway?

A. 60km/hr

B. 90km/hr

C. 90km/hr

D. 120km/hr

Answer: D

3. Whats the meaning of this sign?

A. embankment road

B. dangerous hillside road

C. rock-falling road

D. cliffside road

Answer: B

4. Traffic Police can detain the vehicle according to law if it is suspected of using the label of inspection from other vehicle.

A. Right

B. Wrong

Answer: A

5. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

6. Whats the meaning of this sign?

A. crosswalk

B. students passage

C. watch for pedestrians

D. childrens passage

Answer: A

7. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer: B

8. Whats the meaning of this sign?

A. national boundaries

B. border defense

C. boundaries

D. customs

Answer: D

9. Whats the meaning of this sign?

A. 3m width limit ahead

B. 3m width limit

C. the 3m width limit ban is lifted

D. 3m height limit

Answer: B

10. It lights to indicate that ______

A. the head fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the tail fog light is turned on

Answer: C

11. A motorized vehicle runs on the road without a label of inspection, the traffic police can detain the vehicle.

A. Right

B. Wrong

Answer: A

12. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

13. Whats the meaning of this sign?

A. expressway exit

B. expressway beginning

C. expressway entry

D. expressway ending

Answer: B

14. Using the high and low beam lights alternately while driving on the road of this kind of sharp curve.

A. Right

B. Wrong

Answer: A

15. When a vehicle passes a tunnel, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

16. It lights continuously to indicate that engine control system failed.

A. Right

B. Wrong

Answer: A

17. Speed up when passing the overflowing road.

A. Right

B. Wrong

Answer: B

18. Whats the meaning of this sign?

A. no passing for small vehicle

B. passing for small vehicle only

C. passing for motorized vehicle

D. no passing for small vehicle

Answer: C

19. When a vehicle starts up, the driver should observe the traffic conditions and begin to start up after making sure it is safe to do so.

A. Right

B. Wrong

Answer: A

20. The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer: B

21. No U turn at this section.

A. Right

B. Wrong

Answer: B

22. What marking is the white broken line on the road?

A. central line of opposite lanes which is prohibited from crossing

B. central line of opposite lanes which is restricted from crossing

C. central dividing line of the one-way road lanes

D. central line of same direction lanes which is allowed to cross

Answer: D

23. How to do when encountering this situation of waiting in line?

A. cross the solid line from left side to overtake

B. overtake from both sides as will

C. wait in line

D. borrow the lane from right side to overtake

Answer: C

24. What is the max speed on this highway?

A. 70km/hr

B. 50km/hr

C. 40km/hr

D. 30km/hr

Answer: C

25. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A