陇南中国驾驶证英文版

1. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer: C

2. When encountering a vehicle in the opposite direction forcing its way by using his lane, the driver should __________.

A. Force the other side to drive by the right side

B. Use the high beam light to warn the other side

C. Voluntarily yield to the other side

D. Go ahead by the center of the road

Answer: C

3. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A

4. Whats the meaning of this guide arrow?

A. no passing

B. driving lane

C. merging

D. going straight

Answer: D

5. What is the max speed when down slope, turning around and U turn?

A. 50km/hr

B. 60km/hr

C. 30km/hr

D. 40km/hr

Answer: C

6. Whats the meaning of this sign?

A. no left turn

B. leftt and right turn

C. no leftt and right turn

D. no right turn

Answer: B

7. When causing a road accident involving property damage, the party should leave the scene on his own but he does not leave and causes a traffic jam, he may be subject to a fine of 200 yuan.

A. Right

B. Wrong

Answer: A

8. What will be subject to if submitting false materials to apply for driving license?

A. a 20~200 yuan fine

B. disqualification for applying for

C. cannot re-apply for within 1 year

D. cannot re-apply for within 2 years

Answer: C

9. Using the high and low beam lights alternately while driving on the road of this kind of sharp curve.

A. Right

B. Wrong

Answer: A

10. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

11. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer: B

12. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer: D

13. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

14. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

15. Cannot make a U turn in this section.

A. Right

B. Wrong

Answer: A

16. When driving during the period of probation, the driver should paste or hang _____ on the rear part of the vehicle

A. a mark of avoiding with care

B. a mark of paying attention of beginner

C. a uniform probation mark

D. a mark of paying attention of vehicle distance

Answer: C

17. Whats the role of directional sign?

A. restrict the vehicles from passing

B. indicate speed limited information

C. provide direction information

D. warn danger ahead

Answer: C

18. Driving a motorized vehicle on the road should be required to be with a license plate.

A. Right

B. Wrong

Answer: A

19. Whats the meaning of this sign?

A. special car park

B. uncovered car park

C. indoor car park

D. internal car park

Answer: C

20. What marking are the white broken lines in the circles?

A. small vehicles turning lines

B. lane connection lines

C. non-motorized vehicles guide lines

D. intersection guide line

Answer: D

21. What does this sign mean?

A. Reminding continuous two or more up slopes ahead

B. Reminding the steep uphill road ahead

C. Reminding the steep downhill road ahead

D. Reminding continuous two or more down slopes ahead

Answer: D

22. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

23. Whats the meaning of this sign?

A. no U turn at intersection

B. no changing lane from both sides

C. no left or right turn

D. no going straight

Answer: C

24. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer: B

25. When encountering non-motorized vehicles intending to bypass a stopping vehicle, the driver should ________.

A. Honk to indicate them to yield

B. Yield to them

C. Speed up and bypass

D. Follow them closely and honk

Answer: B